Reflow Simulator
Kontakta oss för mer information
SRS 2 Reflow Simulator & Warpage Measurement
SIMULATOR & WARPAGE MEASUREMENT
Observe and measure the curving and warping of electronic parts andboards due to thermal stress, using actual reflow conditions.
FEATURES & BENEFITS:
- Measure the warping of a part or board due to heat.
- A laser on the underside measures the displacement in both X and Y-axis directions.
- 19-point configuration and selectable temperature setting allow for the measurement of warping trends.
- Dedicated software analyzes the displacement measurement data.
- Optional video monitoring system enables you to observe and record the melting process of the solder.
SPECIFICATIONS:
| SRS-2 REFLOW SIMULATOR |
| Item |
Specification |
| Applicable Circuit Board |
Up to 70W x 70L x 10H mm |
| Outer Dimension |
652W x 411D x 425H mm |
| Heating Method |
Upper-face : Extreme infrared radiation with hot air
Lower-face : Extreme infrared radiation |
| Cooling Method |
Flowing air or N2 air (with flow adjustable valve) |
| Power Supply |
200V 50/60Hz 1.6kVA 3Phase |
| Air |
0.3 - 0.5MPa 100 liter/min (Maximum) |
| O2 Concentration in Furnace (when using N2) |
100ppm minimum |
| PCB Installation |
Flat plate system (heat resistant glass or ceramic coated plate) |
| Upper-Heater |
Hot air heater : Approx. 675W
(Approx.75W x 3 x 2lines+Approx.225W x 1)
* Deviation to the standard nozzle can be set.
Extreme infrared radiation heater : Approx. 360W |
| Lower-Heater |
Extreme infrared radiation heater : Approx. 360W |
| Temp. Accuracy |
5C maximum
(Maximum range : 50(W) x 50(L)mm in the center) |
| Measuring Temp. Range |
Room temp. - 330°C |
| Measuring Points |
points |
| N2 Gas Supply Function |
100 liter/min. with flow regulating valve during operation. |
| Weight |
Approx. 50kg |
| WARPAGE MEASUREMENT |
| Item |
Specification |
| Displacement |
A laser displacement measuring sensor reads warpage from below the sample. |
| Measuring Range |
X and Y-axis : Max 70mm, Z : Reference point 0 - 3mm |
| Resolution (Warpage Measurement System) |
Max 0.2μm |
| Laser X-Y Movement Speed |
Max 45mm/s (without acceleration and deceleration) |
| Measurement Points |
Up to 19
(Continual measurement at specified time / temp) |
* Specifications subject to change without notice
Kontakta oss för mer information
