RCAB

 

 

   
SR1C SRS 2

RDT 250

VDM-2

Reflow Simulator

malcom-logo.jpg

Kontakta oss för mer information

RDT -250C Reflow Simulator

rdt-250c.jpg

Reflow Simulator

Reproduce the temperature profile of the Reflow oven. Can observe themelting state of solder paste and record the process.

FEATURES & BENEFITS:

  • The local matrix control system of upper heater makes possible reflow soldering of PCB in which the thermal capacity is balanced with the best heating temperature.
  • Low power consumption provides excellent cost/performance benefits.
  • Can accommodate full size PCB boards for testing (250 x 330mm).
  • Each heating stage sets the temperature as well as the time. It makes it possible to change the time which keeps the reflow peak temperature free.
  • Can observe the state of soldering through wide glass windows from the rear of the unit.
  • Reproduce nearly the same conditions as an actual reflow oven by using the hot air of the upper-heater and the extreme infrared radiation of the lower heater together.
  • Can heat in a N2 atmosphere and control N2 concentration with the 02 Oxygen Analyzer, OAS-1, and N2 flow adjustable function. (OAS-1 is optional)

SPECIFICATIONS:

Item Specification
Applicable Circuit Board Up to 250W x 330L x 15H mm
Outer Dimension 830W x 557D x 523H mm
Heating Method Upper-face : Extreme infrared radiation with hot air
Lower-face : Extreme infrared radiation
Cooling Method Exhaust damper continuous operation by flowing air or N2 air (with flow adjustable valve)
Power Supply 200V 50/60Hz 18kVA 3Phase
Air 0.3 - 0.5MPa 100 liter/min (Maximum)
O2 Concentration in Furnace (when using N2) 100ppm minimum
PCB Installation Net system or Carrier system (Selectable on request)
Upper-Heater Extreme infrared radiation with hot air heater
: 7.2kW (Approx.240W x 30 block)
* Adjustments can be made using the Matrix control system
Hot air heater : 8kW (2kW x 4)
Lower-Heater Extreme infrared radiation heater : Approx. 2kW (330W x 6)
Temp. Accuracy Room temp. - 80C : +/-3C
80C - 330C : +/-2C
Measuring Temp. Range Room temp. - 330C
Measuring Points 1 - 6 points
N2 Gas Supply Function 100 liter/min. with flow regulating valve during operation.
Control Exclusive software <RDT-250S> for Windows XP/2000
Weight Approx. 110kg

* Specifications subject to change without notice.

Kontakta oss för mer information

 

Copyright© RSA Rosengren Consulting // info@rc-ab.se