Cutting & Forming Device Type AXC042
Description:
The AXC042 is designed to cut, stamp and bend the leads of axial components.
By the use of interchangeable tool sets a variety of form configurations can be achieved with this device.
The change can be done easy and secured in less than two minutes.
The settings will be displayed on the scale of the device.
The embossing for the leads is tooling-specific.
These tools are produced to meet customer requirements.
The components are hand fed into the tooling.
The component body has to be centred between the bending anvils.
After the Foot pedal is depressed, the component leads are clamped on both sides.
The leads are then cut to length and depending on the form shape the required lead features are put in the leads at this time.
After that, the leads are bending to the 90° configuration.
The processed component is then rejected by the front of the device.
Specification |
|
- dimension |
300 x 500 x 210 mm |
- weight |
approx. 8 kg |
- compressed air |
4 to 6 bar |
- min. pitch |
C 042: 10 mm
C 042/S: 12,5 mm |
- max. pitch |
C 042: 70 mm
C 042/S: 70 mm |
- lead Ø |
C 042: max.0,8 mm
C 042/S: max. 1,3 mm |
- components |
loose or belted |
- operation |
manual via pneumatic Foot pedal |
- production rate |
2.500 pcs/hr |
